The FBT HORIZON series is a line of loudspeakers powered by a built-in power amplifier, which is popularly called as active.
FBT HORIZON is a system that successfully handles spaces with huge cubature such as arenas, theaters, stadiums, concert halls, houses of prayer, etc.
The entire FBT HORIZON series is equipped with B & C speakers, while the Class D amplifier module is made of die-cast aluminum with natural convection, providing high RMS power.
As FBT has already accustomed us, the HORIZON series also offers the possibility to choose from 8 pre-defined setups, i.e. 8 DSP processor settings. The Horizon series has built-in Neutrik plugs, while the casings are made of 0.47 “thick birch plywood with a scratch-resistant coating and are equipped with two handles and rubber finish. The integrated speaker joint system gives you the ability to set at an angle of 5 ° to 20 ° in steps of 5 °. The front of the column is covered with a perforated steel grid with a powder coating. There is also a rain cover that protects electronic parts from water during open space shows.
Detailed specification below.
Applications:
- Touring sound reinforcement
- Theatres, Stadiums, Concert Halls, Arenas…..
- Ideal for reinforcing and extending the low range of the HORIZON VHA system
Specifications:
- System Type: 1-way bass-reflex subwoofer
- Build-in Amplifier: 1200W RMS
- Build-in Amplifier peak: 2400W
- Frequency Response @ -6dB: 50Hz – Preset dependent
- Input Impedance: 22kOhm
- Maximum SPL (cont/peak): 131,5/135dB half space
- Dispersion: Omnidirectional
- Crossover Frequency: Preset dependent
- Power consumption: 640W
- Nominal power requirement: 220-230Vac 50/60Hz
- Low Frequency Woofer: 1×12″ – 3″ coil
- Input Connectors: 1 male + 1 female XLR IN/LINK
- Net Dimensions (WxHxD): 612 x 360 x 397mm
- Shipping Dimensions: 720 x 410 x 515mm
- Net Weight: 26kg
- Shipping Weight: 28kg
- Enclosure: 0,47″ birch plywood
- Power Cord: 5mt.
Applications:
- Touring sound reinforcement
- Theatres, Stadiums, Concert Halls, Arenas…..
- Ideal for reinforcing and extending the low range of the HORIZON VHA system
Specifications:
- System Type: 1-way bass-reflex subwoofer
- Build-in Amplifier: 2500W RMS
- Build-in Amplifier peak: 5000W
- Frequency Response: 30Hz – Preset dependent
- Input Impedance: 22kOhm
- Maximum SPL (cont/peak): 137/143dB half space
- Dispersion: Omnidirectional
- Crossover Frequency: Preset dependent
- Power consumption: 650W
- Low Frequency Woofer: 1×18″ – 4″ coil
- Input Connectors: XLR with loop
- Net Dimensions (WxHxD): 606 x 700 x 720mm
- Shipping Dimensions: 700 x 897 x 800mm
- Net Weight: 65kg
- Shipping Weight: 75kg
- Enclosure: 0,70″ birch plywood
- Power Cord: 5mt.
Applications:
- Touring sound reinforcement
- Theatres, Stadiums, Concert Halls, Arenas…..
- Ideal for reinforcing and extending the low range of the HORIZON VHA system
Specifications:
- System Type: 2-way bi-amplified line array
- Build-in Amplifier: 600/300W RMS
- Build-in Amplifier peak: 1200/600W
- Frequency Response @ -6dB: 65Hz – 20kHz
- Input Impedance: 22kOhm
- Maximum SPL (cont/peak): 128/133dB half space
- Dispersion: 90°H x 20°V
- Crossover Frequency: 1,2kHz
- Power consumption: 640W
- Nominal power requirement: 220-230Vac 50/60Hz
- Low Frequency Woofer: 4×6,5″ – 1,5″ coil
- High Frequency Woofer: 1×1,4″ – 2,5″ coil
- Input Connectors: 1 male + 1 female XLR IN/LINK
- Net Dimensions (WxHxD): 612 x 360 x 397mm
- Shipping Dimensions: 720 x 410 x 515mm
- Net Weight: 31kg
- Shipping Weight: 33kg
- Enclosure: 0,47″ birch plywood
- Power Cord: 5mt.